New Products
Find 5 Axis Water Jet Cutting, 5 Axis Water Jet, CNC Water Jet on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.
Because water jet cutting is a kind of flexible cutting, the product section cut by traditional three-axis CNC Waterjet Cutting Machine will have a certain inclination angle, but in order to ensure the accuracy of vertical cutting section, the cutting speed must be reduced. YC dynamic 5 axis waterjet machine can ensure the accuracy of the vertical cutting section by compensating the cutting angle of ±10° without reducing the cutting speed.
This kind of dynamic 5 axis waterjet cutting machine is very suitable for cutting marble and granite to do stone parquet, because it can also be said to be a bevel cutting machine. Stone cutted by it not only does not need to be polished twice, but also saves time and effort; but also makes the gaps of the parquet smaller and the floor parquet more perfect.
Product parameters:
Cutting Table Details
High Pressure Pump
Control: PLC Shifting: electro-hydraulic Control Cooling: cooler/oil heat exchanger Inlet water filter accuracy: ≤0.45μm Oil-return filter accuracy: 20 μm Working temp: 0-50°c Outlet: UNF 3/8" Cooling in/out-let: NPT1" Max orifice size: 0.33mm Siemens or YASKAWA motor The high pressure pump designed by our company is easier to install and maintain, and the working pressure is stable, which fully ensures the working efficiency. The whole set of intensifier assembly or main parts of intensifier assembly are imported from USA (Accustream/Hypertherm) directly.We are the partner of Hypertherm.
High Pressure Pump Main Feature:
Other series of high pressure pumps
Double High Pressure Pump Servo high Pressure Pump
Hypertherm High Pressure Pump
CNC Controller
YC Waterjet Cnc Controller And Software(WEIHONG System) 1.17ʺLCD liquid crystal display. 2.DNC on-line working function. 3.Functions of returning arbitrary point, bending and circular are working auto deceleration. 4. Function of cutting figure imitation display. 5. 80GB memory hard disk. 6. MITSUBISHI AC servo driver and motor. 7. 1GB memory card. 8. Multilingual function(Chinese English etc.). 9. Drive-by-wire and hand-hold controller. 10. NAIKY PCIMC-6A special software is special for YC. Noted:You can also choose the Italian ECS or ESA control system.
Abrasive feeding system and Cooling system
Remove the abrasive from the tank automatically, separate the abrasive and water.Reduce the labor force,improve work efficiency.The absorption pump sucks up the mixture of sand and water from the tank into a collection box when it works.There are plastic woven filter bags in the collection box,water is recycled to the machine tank, sand and the mixturefrom cutting are collected into filter bags Inside. So as to achieve the purpose of automatic collection to make it easy to clean. DATA OF ABSORPTION PUMP Many kinds of compounds exist in the running water (such as calcium carbonate, carbonic acid). As the machine works, the temperature rise will generate some substance of the reaction of chemistry or physics-as we called it furring, which will reduce the life of the high pressure system and increase the cost. After many years' experience, we have developed the system that can solve the problem. We would like to recommend you this optional part if your supplied water is low quality. Quality requirement for water
Abrasive feeding system Air cooling system Oil cooling system
Optional item for Waterjet Machine
Waterjet Auto Sludge remove system
Data of Single pump
Flow rate:8 M³/H
Lift:50 M
Exit pressure:6 kgf/cm²
Absorption distance:7 M
Max. Diameter of solid particle which can get through:4.5mm
Inlet and outlet diameter of pump:40mm
Power:compressed air
Max. Inlet pressure:7 kg f/cm²
Max. Consumption of air:0.6 mm³/min
Diameter of air pipe:10mm
Collection box:1.6m*1.0m*1.0m
Water Jet Soften Treatment
Since the high-pressure water cutting work after high pressure, orifice small particles of impurities in raw water cutting and scaling, corrosion ion has an impact on the working life of equipment and precision, therefore, must be treated to the raw water supply equipment. High-pressure water jet cutting water quality requirements for the job: deionized water. Basic requirements for high pressure water jet cutting system with water quality water is greater than 0.5μm impurities must be removed, because in addition to the general water contains a certain amount of fine solid particles, there are many minerals dissolved in water, such as calcium carbonate, manganese , iron and silica, etc., not only reduces the life of the nozzle, but also affect the cohesion of the jet, thereby reducing the cutting efficiency. So be sure to remove it.
Hydraulic Loading System
Water Jet Cutting Head With Drilling Function
Related Products
(Bevel Cutting 0-±10°) Max 5axis WaterJet Cutting Machine (Bevel Cutting 0-±45°)
Dynamic 5axis Waterjet Machine Pure water waterjet cutting machine
Multi- heads Machine
Cantilever Waterjet Cutting Machine Robotic Waterjet Cutting Machine
Cutting Samples
Packing & Delivery
Customer Feedback
Our Service
Pre-sales service
Company Information
1999, YC Industry was established by Mr. Min, mainly engaged in manufacturing large Production Line. 2005, YC started to research and developed UHP water jet cutting equipment and cooperated with German KMT as well. 2008, YC started to cooperate with the UK agent. 2019,YC has sold the products to more than 50 countries . Our chief engineer Mr. Tian who started research of water jet when he was a university student has 20 years experience in water jet cutting field, and other technical persons have over 10 years experience. For different customers in different industries we will provide different solutions, Your water jet is tailored based on your individual needs.
Development
2009, YC started to cooperate with USA Accustream whom is specialized in water jet parts and pumps.
2014, YC Industry built a new company Wuxi YC Waterjet Technology Co.,Ltd.
2015, YC WATERJET started to cooperate with RU agent. Why us
We are engaged in machinery manufacturing since the year 1999,there are more than 20% workers with more than 8 years experience in water jet cutting field.
YC is the partner of Accustream/Hyperthem, every year we have technical meetings with engineers from USA.
Our Engineers go to many countries for installation and debugging every year.
Certifications
Product Categories : 5 Axis Waterjet