Model NO.: GYMK 1200*2800
Automatic Grade: Automatic
Machine Economic Printing Speed(PCS/Min): 110-140PCS/Min
Paper Feeding Thickness Range (Mm): 2.5-12
Category: Carton Machine
HS Code: 8441309000
Type: Automatic Carton Making Machine
Machine Max Speed: 140-180 PCS/Min
Max Paper Feeding Size (Mm): 1200*2800
Standard Printing Forme Thickness (Mm): 7.2
GYMK 1200*2800 Printing Slotting Die-cutting Carton Machine
Carton Making Machine
Introduction for integral machine:
Machine adopts PLC program control, the drive to adjust the phase body, touch screen and button dual system operation; Controllable roller intelligent automatic landing, the Indian version scrub the memory reset automatically, personalized Qi paper, fixed to complete the Auto Standby function.
-Main drive gear made of high quality alloy steel (20CrMnTi), by program-controlled carburizing and quenching, grinding treatment, the accuracy can be achieved six high hardness, high-precision gears (tooth surface hardness HRC58-62).
Touch-screen display setting value, the control plate of each group and the position of the adjustment slot knives; Can set the production rate, and a count and prompts.
-Pull the paper delivery round of self-locking quick transfer function, avoid the destruction of the screw fastening devices operating on the roller and a great inconvenience.
- Application of free connection device, eliminating the gap generated by the traditional connection to maintain long-term precision printing chromatic.
-Gearing body splash with spray devices; Lubrication system automatically cycles and installation of seepage oil bodies.
The units used between the cylinder lock and locking machine with a strong self-locking mechanism, to ensure the stability of the unit.
Negative pressure vacuum suction feed system and feed with skip function.
Adopt imported light rail linear bearing feeding, so that paper feeding is correct, and smooth.
Automatic document feeder institutions simultaneously with the ink roller in order to work effectively to ensure the printing quality, reduce waste and defective products occur.
In addition to setting the cleaning litter institutions, and in accordance with the actual situation of wind adjustment.
Power adjustment bezel around, working position tailgate can be set free paper manual or electric homogeneous way, the operating frequency can be set arbitrarily.
Feed roller is designed around the axis structure; the soft tube is combined with both a good stretch and abrasion resistance.
Data can display machine speed and production quantity
Servo edge feeder institutions
Use with fast response, high positioning accuracy, system stability, long service life of the servo motor, replace mechanical cam with electronic cam control.
Feeding the servo motor shaft axle and connected by timing belt, eliminating the work of any of the feed roller gaps, improve feed accuracy, and avoid wandering around the phenomenon of cardboard.
Unique quick-change semi-round structure, to ensure the consistency of feed location, feed wheel circumference to avoid inconsistencies in surface wear and replacement is very easy and fast.
Printing phase, the axial position with PLC programmable logic controller to control; machine touch screen, power button and dual action; print roller with automatic reset after wiping version of the memory function.
Linkage with the feeder roller lift, open or stopped when the feed roller and the printing plate according to the order automatically from, together.
Pull transfer paper designed to self-locking quick round of transfer function, avoid the destruction of the top compression roller fixtures.
Operations set the ink rollers and ink pump start and stop function; Indian Roller phase, digital display to adjust the axial position.
Department of foot plate electric switch device can be quickly linked version, adjusted to facilitate the work of changing version and scrub.
Printing phase with magnetic clutch brake mechanism, separation machine gear position can be automatically locked to prevent the loss of zero plate.
Department of device penetration ink splash pad and back across agencies, to prevent water overflow, and fly ink of ink printing quality.
Print board Roller, embossing rollers made of high quality alloy steel, the surface grinding and hard chrome plating; dynamic balance at coarse and fine adjustment on the two devices to ensure the best balance.
Number of significant features with planetary gear-type Phase adjustment of printing plate roller for electric phase adjustments.
Has several significant features of the axial fine-tune the body, the Indian Roller axial electric adjustment.
Configuration self-locking preload adjusting structure quickly to ensure that the disk, between the long axis of the precision, the pressure line slowed the destruction of cardboard.
Parcel line of high quality polyurethane wheels pressure to protect the board from damage plasticity.
About synchronization with the axial electric shift linkage, so bottom line pressing roller, the upper and lower slot knife, guide roller synchronization adjustment.
Number of significant features with planetary gear-type phase adjusting mechanism, the phase of the slot, slotted box high for electric adjustment.
Selection of high quality alloy steel slotted knife, tooth blade width 7mm.
Equipped with self-lubricating wear-resistant guide block to ensure the pressure wire wheel, slotted knife wheel, the shift guide roller to the right and increase durability.
Creasing wheel, slotted wheel made of high quality alloy steel, the surface grinding and hard chrome plating; dynamic balance at coarse and fine adjustment on the two devices to ensure the best balance.
Slotted panel operation with the Ministry of feed on, off and host to move the button, with multi-point adjustment operation function. (Without cutting)
Unique built-in differential compensation device, when the diameter changes in pads excellent, can automatically compensate for line speed, slowing the excellent wear pads, to ensure that each batch of exactly the same die size of the workpiece.
When cutting the Department is in the standby state, the template will automatically roll roller disengaged with the pads in the same time reduce the load loss machine; prolong the Urethane and the die cutter life.
Work in the cutting department, excellent pads set to automatically roll displacement state; excellent pads roll roller speed differential with the template design; device from the automatic cutting mechanism of the cushion roll repair device can be carried out on Urethane multiple repair; excellent pads roll through the optimal design of cutting the workpiece to ensure product quality.
With the number of planetary gear display Phase adjustment of the phase adjustment of electric roller template.
Digital display of the template body rolls axial fine-tuning of roller axial electric adjustment template.
Cutting roller, roller pads are made of high quality steel, after first normalizing internal, cylindrical for cutting, the hard chrome plating, after grinding, balancing, respectively coarse and fine adjustment on the two devices, so that the workpiece optimal state of balance.
Operations panel set cutting feed on, off and host to move the function and configuration of the printing, slotting the Ministry of phase adjustment button.
Installed automatic correction function with anti-post moves to clear waste conveyor.
Splicing can be set to automatic and manual arm any operation, a separate paper, then transfer belt, easy to select the number of connected paper arm.
Transfer function with brake motor movements; column configuration on both sides of heavy bodies fall protection; to maintain a safe working machine working position.
Ministry stacking tray can be configured to take automatic or manual operation, allowing the stacking height of 1600mm.
Conveyor belt use wrinkles slip type, the transfer board when the non-slip smoothly.
Pneumatic connection tray in cardboard packing to a predetermined altitude, take care of paper paper pop-up, boosting the board
| standard || 1200*2800 |
| Machine max speed || 160 |
| Machine economic printing speed(pcs/min) || 130 |
| Max paper feeding size (mm) || 1200*2800 |
| Min paper feeding size (mm) || 300*685 |
| Paper feeding thickness range (mm) || 2.5-12 |
| Max printing area (mm) || 1150*2800 |
| Standard printing forme thickness (mm) || 7.2 |
| Production Power (kw) || 30 |
| Total power (kw) || 45( according to printing group) |
| color || 1 color |
Contact us if you need more details on Carton Machine. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Carton Machinery、Carton Making Machine. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : Printing Slotting&Die-Cutting Machine